Who and what is the MC1 designed for ?

The Pro-Shot MC1 is a self contained laser receiver and visual display that is designed for use on diggers.
Popular amongst the small digger operator for drainage it enables the operator to take elevation readings from
the control seat. The electronics are housed in a heavy aluminium extrusion and provides 205mm of receiving
height in a 120 degree arc. The bright LED display can be seen at a distance and provides 5 channels
of information - high - high fine - on grade - low fine - low. Controls consist of an on/off switch and a switch to
control brightness of the LED display. The MC-1 will run for approximately 200 hours on 4 'C' batteries or 70
hours on rechargeable ni-cads. The unit comes with a magnetic mount allowing the receiver to be
slid up and down a section of steel channel.

Ideal for excavators, backhoes, trenchers etc.

What functionality and specifications does the MC1 have ?

• Reception :120 degree
  
  
• Beam reception range: 300m (depending on laser)
  
  
• Vertical window: 205mm
  
  
• Elevation display : 5 channel - high -high fine - on grade - low fine - low
  
  
• Laser compatibility : 450 to 1200 rpm
  
  
• Accuracy mode: 13mm
  
  
• Run time on batteries: 200 continuous (Alkaline)
  
  
• Power button: display - bright/dim
  
  
• Auto power off: after 2 hours (no strikes)
  
  
• Power supply: 4 x ‘C’ batteries

What is the warranty ?

The 3 warranty covers any defects in materials or workmanship