Accuracy +/- 2.4mm per 30m

Who and what is the L6 designed for ?

The Pro-Shot L6 laser level is a servo driven visible automatic laser for internal work.

The L6 is delivers a highly visible rotating beam and plumb spot for suspended ceilings, walls, and layout work.
It provides servo motor automatic horizontal leveling and vertical plumb.
The variable speed rotating beam can also be stopped or set to scan in a selectable arc of 0-90 degrees.

The remote control allows control of rotation and scan modes, and alignment in the vertical mode up to 30m from the laser.
You can also manually tilt the rotating plane in one axis while self leveling in the other
or both axis to match existing heights.

The remote control also allows the laser to be switched off.

What functionality does the L6 have ?

• Automatic Horizontal Leveling - with servo motors.
  
  
• Automatic Vertical Leveling - servo leveled when on it's side.
  
  
• Plumbing - Automatically plumbs laser dot to the ceiling.
  
  
• Squaring - when lying on it's side allows for 90 degree setout.
  
  
• Vertical plane - sends vertical plane out when lying on it's side
  
  
• Scanning -Beam can be scanned in small arcs to give greater intensity
  
  
• Rotation Control - 0-500 rpm
  
  
• Grade - the laser can be switched from auto to manual mode to allow grade overide in both axis.
  
  
• Remote control - controls functionality
  
  
• Manual mode - laser can be used in manual or automatic mode
  
  
• ON/OFF - laser can be turned off with the remote control

What are the Specifications ?

L6 Laser Accuracy : +/-2.4 mm per 30m (15 sec arc) Rotational coverage : 360 degrees Rotation speed : 0-500 rpm Power supply : 2 x 'D'' cell alkaline batteries Battery life : 65 hours approx with alkaline batteries

What is the standard package ?

The ceiling package consists of the L6 laser, carry case, shockwatch, remote control,
ceiling/vertical mount, 2 x magnetic targets calibration sticker and Test calibration certificate.