Accurate Instruments (NZ) Ltd.
192 Marua Road
Mt Wellington
Auckland

Phone : (09) 579 1777
Fax : (09) 579 1776

Email Enquiries

HOME



Pro-Shot L5 Automatic Laser Level




This instrument is
checked, calibrated
and certified by
Accurate Instruments
then fitted with a shockwatch.




Accuracy +/- 3.0mm per 30m

Who and what is the L5 designed for ?

The Pro-Shot L5 is an automatic version of the L3 laser. With it's self leveling it can be used for general outdoor
work such as decks and repiling or taken inside for interior work such as suspended ceilings and internal fitouts.
The L5 does not have the grade capability of the L3 but the automatic compensator keeps the laser on level
throughout the day and provides higher accuracy.


If you are a builder setting out profiles and floors go straight to the L4 Laser.


What functionality does the L5 have ?

  • Automatic horizontal Leveling - compensator

  • Manual Vertical Leveling - manually aligned when on it's side.

  • Plumbing - plumbs laser dot to the ceiling.

  • Squaring - when lying on it's side allows for 90 degree setout.

  • String Line setout - when lying on it's side allows string line set out on windy days.

  • Vertical plane - projects rotating vertical plane when on it's side.

  • Manual pointing - by turning laser head with your fingers dot can be pointed in direction.

  • Scanning - beam can be scanned in small arcs to give greater intensity for interior work.


What are the Specifications ?

L5 Laser

  • Range : 150m radius / 300m diameter with R7
  • Accuracy : +/-3.0mm per 30m (20 sec arc)
  • Rotational coverage : 360 degrees
  • Rotational speed : variable in steps 0 - 450 rpm
  • Scan angle selections : 15, 30, 45, 90 degrees
  • Power supply : two 'D' cell batteries
  • Battery Life : 70 hours approx with alkaline batteries

R7 receiver

  • 3 accuracy modes
    Fine: +/- 0.4mm, Std: +/- 1.6mm, Coarse: +/-3.2mm
  • Power supply : 9v battery
  • Speaker volume : off, low, high
  • Displays : front & rear height
  • Reception angle : 120 degrees
  • Auto shut : off after 12 min.
  • Rotation capability : 250 - 850 rpm
  • Elevation displays : 5 channel display

What is the warranty ?

The L5 has a 1year warranty which covers defects in materials and workmanship.


Calibration

Once shipped from the manufacturer, Accurate Instruments Optical and Electronic Service Centre calibrates all
instruments on collimators and ranges then fits them with the appropriate shockwatch, calibration sticker and
test calibration certificate. Shockwatches indicate to the user whether the instrument has been dropped.


What is the standard package and what are my options ?

A standard construction package usually consists of the laser, receiver, heavy duty aluminium tripod,
carry case, shockwatch, alkaline batteries, calibration sticker and Test calibration certificate.
A standard ceiling package usually consists of the laser, WM1 ceiling/vertical mount, 2 x magnetic targets,
carry case, alkaline batteries, shockwatch, calibration sticker and Test calibration certificate.
Optional ceil/vertical brackets, staves and re-chargeable battery kits etc are also available.
Please phone to discuss a package to suit your requirements.






Accurate Instruments (NZ) Ltd. is a 100% New Zealand owned company.
Site Design copyright (c) 2002 LISBURN DESIGNS

Disclaimer