L3 laser level - Accurate Instruments (NZ) Ltd.

This instrument is
checked, calibrated
and certified by
Accurate Instruments.

Accuracy +/- 6mm per 30m

Who and what is the L3 designed for ?

The ProShot L3 is a manually leveled laser and is an ideal tool for landscapers, architects doing
preliminary site levels, bobcat operators, ceiling fixers and for small basic earthworks.

It projects a constant reference plane of laser light and it's highly visible beam can be clearly seen
for indoor work or used with a receiver for outdoor work.

The calibrated slope vial allows coarse grade for drainage and plumbing work.

If you are a builder you need to go straight to the L4 laser.

What functionality does the L3 have ?

Manual Horizontal Leveling - bubble vials.
Manual Vertical Leveling - manually aligned when on it's side.
Plumbing - plumbs laser dot to the ceiling.
Squaring - when lying on it's side allows for 90 degree setout.
String Line setout - when lying on it's side allows string line set out on windy days.
Vertical plane - projects rotating vertical plane when on it's side.
Grade capability - manual grade functionality.
Manual pointing - by turning laser head with your fingers dot can be pointed in direction.
Scanning - beam can be scanned in small arcs to give greater intensity for interior work.

What are the Specifications ?

L3 Laser

Range : 100m radius / 200m diameter with R7
Accuracy : +/-6mm per 30m (40 sec arc)
Rotational coverage : 360 degrees
Rotational speed : variable in steps 0 - 450 rpm
Scan angle selections : 15, 30, 45, 90 degrees
Grade vial : graduations of 1%, 2%, 3%, 4%
Power supply : two 'D' cell batteries
Battery Life : 70 hours approx with alkaline batteries

R7 receiver

3 accuracy modes
Fine: +/- 0.4mm, Std: +/- 1.6mm, Coarse: +/-3.2mm
Power supply : 9v battery
Speaker volume : off, low, high
Displays : front & rear height
Reception angle : 120 degrees
Auto shut : off after 12 min.
Rotation capability : 250 - 850 rpm
Elevation displays : 5 channel display

What is the warranty ?

The L3 has a 1year warranty which covers defects in materials and workmanship.

Calibration

Once shipped from the manufacturer, Accurate Instruments Optical and Electronic Service Centre calibrates lasers on
collimators and ranges then fits them with a calibration sticker and test calibration certificate.

What is the standard package and what are my options ?

A standard construction package usually consists of the laser, receiver, heavy duty aluminium tripod,
carry case, alkaline batteries, calibration sticker and Test calibration certificate.
A standard ceiling package usually consists of the laser, WM1 ceiling/vertical mount, 2 x magnetic targets,
carry case, alkaline batteries, calibration sticker and Test calibration certificate.
Optional ceil/vertical brackets, staves and re-chargeable battery kits etc are also available.
Please phone to discuss a package to suit your requirements.