RSZ3 Reflective Self adhesive Target 3cm x 3cm

CODE: SMART A-RSZ3

3cm x 3cm white reflective adhesive target.
Typical measuring range to the reflective target is up to 80 meters.

Product supplied in pack of 10 targets.

RSZ4 Reflective Self adhesive Target 4cm x 4cm

CODE: SMART A-RSZ4

4cm x 4cm white reflective adhesive target.
Typical measuring range to the reflective target is up to 100 meters.

Product supplied in pack of 10 targets.

RSZ6 Reflective Self adhesive Target 6cm x 6cm

CODE: SMART A-RSZ6

6cm x 6cm white reflective adhesive target.
Typical measuring range to the reflective target is up to 130 meters.

Product supplied in pack of 10 targets.

RS21R Reference Plaster Target

CODE: SMART A-RS21R

The RS21R target is a level datum marker suitable for establishing height ratios for plaster work construction.
These are a permanent target that can be plastered over. The protruding points are used as the height reference.

Target dimensions: 80mm x 50mm.

RS30R Reference height Target

CODE: SMART A-RS30R

The RS30R target has a 3cm x 3cm reflective target as well as a height reference plastic protrusion that a prism pole can be place upon.
Placing a prism pole on this reference protrusion enables monitoring of subsidence.

Suitable for bridge, tunnel and dam construction/monitoring.

Target dimensions: 90mm x 60mm. (reflective target 30mm x 30mm)

RS60R Flat Target

CODE: SMART A-RS60R

The RS60R is a general purpose reflective target designed for a wide range of measuring applications including bridge, fascade, dam and building monitoring and measuring.

Typical measuring range to the reflective target is between 10 and 100 meters.

Target dimensions: 75mm x 60mm. (reflective target 40mm x 40mm)

RSAK80R 90 degree Target

CODE: SMART A-RSAK80R

The RSAK80R is a 90 degree angled reflective target.
Designed for variable measuring angles when measuring can be difficult from one location. Also suitable for 3D monitoring.

Typical measuring range to the reflective target is between 10 and 100 meters.

Target dimensions: 120mm x 65mm. (2x reflective targets 40mm x 40mm)