The PLS90NZ is a self-leveling combination plumb dot and vertical square line laser.

Outdoor Profile Squaring
Designed for squaring up profiles on building sites, the PLS90NZ connects to the timber boards using the profile base mount.
The 2 vertical laser lines are at exactly 90°. With a fine adjustment thumb screw, 3,4,5 alignment can be made precisely and quickly by detecting the laser beams up to 30 meters away with the optional PLS SLD outdoor receiver. (See image below left).

For internal fitout and squaring applications, the PLS90NZ can be simply placed on the floor or surface and the 2 vertical lines will run up the corresponding walls.

Additonally, the PLS90NZ features a laser dot plumb up and plumb down mode allowing the unit to be used to precisely transfer vertical points like a plumb bob.

The PLS90NZ is designed for builders, tiling, kitchen and bathroom fitout, electrical technicians, structural steel and joiners, and commercial interior fitout contractors.

PLS lasers do not use pendulum locks for their lasers. Their engineers have developed a system that does not require a locking mechanism. If an instrument needs a lock to protect the leveling mechanism, what happens when it falls from a height during use? – 'run to the laser and move the lock into position half way through its fall before it hits the ground?’

About PLS (Pacific Laser Systems)
Pacific Laser Systems started the compact plumbing, squaring and line laser market over 17 years ago in San Francisco, USA. Today, they still have the widest range of professional plumb, square, level and cross line lasers available anywhere!

PLS is one of the only manufacturers to make parts and service available for their products.

Once shipped from the manufacturer, Accurate Instruments' Calibration and Service Centres check and adjust all instruments on collimators and ranges, then fit them with the appropriate shockwatch, calibration sticker and issue a test calibration certificate.

Shockwatches a damage indicator that alert the user whether the instrument has been dropped.

The PLS90NZ is checked, calibrated and certified by Accurate Instruments then fitted with a shockwatch.

PLS90NZ laser
NZ Certification sticker - dated calibration
NZ Calibration accuracy certificate - laminated
Shockwatch damage indicator
Magnetic mounting bracket
Profile base mount
Red targets with stand (set of 2)
Alkaline batteries
User instruction manual
Hard carry case
2 Year warranty - NZ authorised dealer approved
ETN exchange program - PLS approved
Free service loan backup*