The PLS360NZ is a self-leveling, one button 360° horizontal line laser.
Connect the PLS360NZ to Rondo ceiling mounts using the wall bracket supplied. Switch the unit on and it will automatically level, projecting a full 360° horizontal line around the room.
Additionaly, the laser can be screwed to a timber stud using the wall bracket and pk screws.
The PLS360NZ is the ideal laser for doing waterlines on boats in factories.
For height control of the horizontal line, mount the PLS360NZ to a height elevating camera tripod.
The PLS360NZ can be used outside in the laser cross mode, between 5 to 75 meters with the optional PLS SLD receiver. (See image direct left)
The PLS360NZ is designed for ceiling fixers, builders, tiling, boat builders, kitchen and bathroom fitout and commercial interior fitout contractors.
PLS lasers do not use pendulum locks for their lasers. Their engineers have developed a system that does not require a locking mechanism. If an instrument needs a lock to protect the leveling mechanism, what happens when it falls from a height during use? – 'run to the laser and move the lock into position half way through its fall before it hits the ground?’
About PLS (Pacific Laser Systems)
Pacific Laser Systems started the compact plumbing, squaring and line laser market over 17 years ago in San Francisco, USA. Today, they still have the widest range of professional plumb, square, level and cross line lasers available anywhere!
PLS is one of the only manufacturers to make parts and service available for their products.
- 360° horizontal laser line beam
- One button - self leveling operation
- Outdoor pulsing mode for use with the optional PLS SLD receiver
- NZ calibrated, tested and supported
- Pendulum lock not required
- Parts & service available
- Accuracy: +/- 3.0mm at 30 metres - Laser Line Beam Span: 360° - Operating Range: Typically 30 metres (dependant on light conditions) - Self Leveling Range: +/- 6° - Weight: 860 grams including battery - Battery Type: 3 x 'D' Size Alkaline batteries - Battery Operating Time: Typically 35 hours - Warranty: 2 Years
Please note: Standard packages and accessories for the PLS360 can vary in different locations around the world
click on image to enlarge
calibration & certification
Once shipped from the manufacturer, Accurate Instruments' Calibration and Service Centres check and adjust all instruments on collimators and ranges, then fit them with the appropriate shockwatch, calibration sticker and issue a test calibration certificate.
Shockwatches a damage indicator that alert the user whether the instrument has been dropped.
The PLS360NZ is checked, calibrated and certified by Accurate Instruments then fitted with a shockwatch.
exclusive NZ authorised dealer
Accurate Instruments (NZ) Ltd is the New Zealand authorised PLS dealer.
PLS (Pacific Laser Systems) are located in in San Francisco, California, U.S.A.
click on image to enlarge
Standard package includes:
NZ Certification sticker - dated calibration
NZ Calibration accuracy certificate - laminated
Shockwatch damage indicator
Ceiling mounting bracket
User instruction manual
Hard carry case
2 Year warranty - NZ authorised dealer approved
ETN exchange program - PLS approved
Parts, calibration, servicing and support available