Trotec T60

BASIC PROBE SYSTEM

The Trotec T60 is a basic moisture meter used for making rapid moisture assesements in a wide range of building materials including wood, masonry, drywall, firewood and plaster using the resistance method with probes.

Timber Moisture mode
The probe mode gives a moisture level value in wood and other building materials from pin electrodes. The moisture content is displayed as bars on the simple LED display.

The Trotec T60 features a set wood type and is calibrated for 20 degrees C. Refer to temperature curves and wood calibraton tables for conversions.


FEATURES

Trotec BM20

BASIC PROBE SYSTEM

The Trotec BM20 is a basic moisture meter used for making rapid moisture assesements in a wide range of building materials.
It has all the same features of the T60 with the addition of a larger measuring range and the display shows the precentage.

Timber Moisture mode
The probe mode gives a moisture level value in wood and other building materials from pin electrodes. The moisture content is displayed as bars with %, on the simple LED display.

The Trotec BM20 features a set wood type and is calibrated for 20 degrees C. Refer to temperature curves and wood calibraton tables for conversions.


FEATURES

Trotec BC15

BASIC TEMPERATURE & HUMIDITY SYSTEM

Temperature & Humidity mode
The BC15 is a "basic" version of the Trotec T250 with a slower update rate.
This instrument is designed for simple determination of air temperature and relative humidity.
The large clear LCD allows the operator to display either the temperature or humidity on the screen and has maximum, minimum and hold modes.

FEATURES

This instrument is ideally suited to :

• measuring the relative humidity inside of the walls in apartments, homes and buildings.
• room humidity
• attaining the air temperature and pressure in a certain environment.