Accurate Instruments

Accurate Instruments (NZ) Ltd.
FREEPHONE : 0508 222 872

Email Enquiries

HOME


 

Trotec Thermometers

Accurate Instruments are the national distributors for Trotec equipment in New Zealand

Trotec BP20

BASIC INFRARED LASER THERMOMETER

The BP20 is used in a wide range of the industry including, building status analysis, heating, airconditioning, general repair maintenance, production processes, food monitoring, electrical systems, automotive engineering and much more.

FEATURES

Laser class 2
Temperature range -35 °C to +800 °C
Accuracy (max) ±1 % of measured value or ±1°C
Ambient temp (at 23°C ± 5K ambient temp.; the higher temp. applies)
Reaction time 0.4 sec
Optical resolution (E: M) 12:1
Smallest measurement spot ø 12.5mm @ 150mm
Ambient temp operating conditions 0° to 50 °C
Rel humidity operating conditions 10 to 90 % at 30 °C non-condensing

Trotec BP20 Laser Thermometer
Trotec TP6

PROFESSIONAL INFRARED LASER THERMOMETER

The TP6 is a professional laser pyrometer designed for use in measuring a wide range of temperatures from as low as -50 °C to as hot as +1000 °C.
Non contact, the laser thermometer emits 2 lasers beams that indicate the measuring spot size of the surface.
The TP6 also has a high optical resolution of 30:1.

Features include a n
on stop measuring mode, pre settable emmisitivity, alarm, maximum measuring mode and hold functions.

The TP6 has a smaller spot measuring diameter compared to the BP20 over longer distances (over 10cm) therefore providing better results and accuracy.

FEATURES

Laser class 2
Temperature range -50 °C to +1000 °C
Accuracy (max) ±1 % of measured value or ±1°C
Ambient temp (at 23°C ± 5K ambient temp.; the higher temp. applies)
Reaction time 0.15 sec
Optical resolution (E: M) 30:1
Smallest measurement spot ø 25.4mm @ 762 mm
Ambient temp operating conditions 0° to 50 °C
Rel humidity operating conditions 10 to 90 % at 30 °C non-condensing

Trotec TP6 Laser Thermometer
Trotec T250

PROFESSIONAL TEMPERATURE & HUMIDITY SYSTEM

The Trotec T250 is precise temperature and humidity measuring instrument.

Temperature & Humidity mode
The instrument enables rapid and accurate determination of air temperature and relative humidity. Both parameters are displayed simultaneously in real time on the easy-to-read display. Ideal for room humidity and concrete floors.

Dew Point mode
In the DP mode as soon as the temperature is below the dew point temperature an alarm sounds together to alert the operator.

Laser thermometer mode
In the IR mode you can use the T250 as a laser pyrometer for surface temperature measurement with measurement location marking.

click here for features and specifications on the T250

 


Trotec T250 Climate & Humidity Meter with IR Laser Thermometer


Trotec T2000S

PROFESSIONAL COMPONENT TEMPERATURE SYSTEM

The Trotec T2000S is a powerful and adaptable system.
Being a component based professional system, the operator can choose which sensors and probes to connect to their T2000S, creating the ideal instrument for their applications.

When being used as a professional temperature meter, the following sensors can be connected.

TS200 Standard Climate Humidity & Temperature Sensor
click here for features and specifications on the TS200

TS240 Narrow Climate Humidity & Temperature Sensor
click here for features and specifications on the TS240

TS460 Airflow and Temperature Sensor
click here for features and specifications on the TS460

TS110/150 Hot Water & Immersion Sensor
click here for features and specifications on the TS110/150

TS130/150 Surface Temperature Sensor

click here for features and specifications on the TS130/150




Trotec T2000S System for measuring water temperature

Trotec T2000S

Trotec BC15

BASIC TEMPERATURE & HUMIDITY SYSTEM

Temperature & Humidity mode
The BC15 is a "basic" version of the Trotec T250 with a slower update rate.
This instrument is designed for simple determination of air temperature and relative humidity.
The large clear LCD allows the operator to display either the temperature or humidity on the screen and has maximum, minimum and hold modes.

FEATURES

Air temp measurement range -20 °C to +60 °C
Air temp measurement accuracy
+/-2.5 °C
Air humidity measurement principle Capacitive
Air humidity measurement range 5…95 % r.h.
Air humidity measurement accuracy +/-3.5 %

This instrument is ideally suited to :

  • measuring the relative humidity inside of the walls in apartments, homes and buildings.
  • room humidity
  • attaining the air temperature and pressure in a certain environment.
Trotec BC15 Climate & Humidity Meter
Trotec BT20

BASIC TEMPERATURE SENSOR FOR HOT WATER

The BT-20 is a handy penetration thermometer with a large measurement range from -40 to +250ºC, which makes it suitable for the widest variety of measuring tasks in catering, retail, handicrafts and industry, and for laboratories and hobbies.
The contact thermometer is equipped with a long, thin, stainless steel measuring spike, which enables core temperature measurements to be made quickly and reliably with a response time of just 2 seconds.
The easy to clean plastic casing is also equipped with a rubberized soft-touch protective sheath, which provides a secure grip in all situations.

This instrument is ideally suited for measurg the temperature of hot water.

Trotec BT20 Thermometer

 

 

 

Accurate Instruments (NZ) Ltd. is a 100% New Zealand owned company.
Site Design copyright (c) 2002 LISBURN DESIGNS

Disclaimer