 |
click on image to enlarge
|
For more information and specifications
click here
|
|
PLS180 Cross Line Laser
CODE:
LASER-PLS-PLS180
The PLS180 is a compact, portable self levelling laser level.
It features 180 degree span horizontal and vertical laser lines that intersect as a cross in front of the laser.
Ideal to place on the floor or surface inside of a building to establish if the floors are level and the walls are plumb. A valuable tool for earthquake assessment.
For external applications, the optional SLD receiver can be used.
Optional camera tripod available.
|
|
 |
click on image to enlarge
|
For more information and specifications
click here
|
|
PLS100 Cross Line Plumb, Level, Square Laser
CODE:
LASER-PLS-PLSHVL100
The PLSHVL100 is a multi-purpose horizontal, vertical, plumb and square line laser. It features a 360 degree continuous horizontal line as well as two 180 degree vertical laser lines. All line intersect to give square and plumb crosses.
A laser dot that shoots down from the PLS100 is the plumb down reference.
The PLS100 is perfect for checking floor levels, wall plumbs and square references inside of a building.
For external applications, the optional SLD receiver can be used.
Optional tripod available.
|
|
 |
click on image to enlarge
|
For more information and specifications
click here
|
|
Zip Level Pro 2000
CODE:
ZIP-LEVEL-PRO
The Zip Level Pro 2000 is a height horizontal leveling device for estimating height changes for preliminary design and in the case of Christchurch, level change evaluation.
A one man operation, the zip level consists of a base unit and a portable hand unit which is "rolled out" like a hose or water level.
Simply place the base unit wherever desired, benchmark the height as zero, and then the hand piece will measure height elevations above or below the benchmark.
The hand unit has a range of 60 meters and has the ability to go around corners.
NOTE: The Zip Level is not designed for setting out profiles, foundations or levels of concrete floors. A high accuracy rotating laser level is required for these applications. Click here to go to General Building & Construction Lasers
|
|
 |
click on image to enlarge
|
For more information and specifications
click here
|
|
Leica Disto D2 Laser Tape Measure
CODE:
DISTO D2
The Disto D2 is a compact laser measuring device with a typical measurement accuracy of +/-1.5mm.
From the leader in laser distance measurers, Leica, the Disto D2 can also measure areas, volumes and calculate pythagoras measurements.
Compact is size, fitting in the palm of your hand, other features include a backlit LCD display, last 10 measured value memory, front and rear measuring references and a 60 meter distance measuring range.
One of the world's best selling laser tape measures.
2 Year warranty (upgraded to 3 years if registered online with the manufacturer within 8 weeks of purchase date)
|
|
 |
click on image to enlarge
|
For more information and specifications
click here
|
|
Bosch 600mm Digital Level
CODE:
DIG LEV 0600-BO
The Bosch DNM 60L 600mm digital level is an aluminium electronic spirit level.
Simply place the level on a surface and the Bosch digital level will tell you the angle of that surface. Angles can be measured throughout 360 degrees so are suitable for plumb applications also.
Also available, the DNM 120L 1200mm model.
Angles can be displayed in degrees, percentage or mm/metre.
The Bosch 600mm digital level has a calibration function that allows the operator to calibrate the level on a flat surface as well as plumb.
Supplied with padded carrycase.
|
|
 |
click on image to enlarge
|
For more information and specifications
click here
|
|
Xtend & Climb 0.9m to 3.95m Telescopic Trade Ladder
CODE:
LADDER-XC
The The Xtend & Climb Trade Ladder eliminates the need for the long ladder on the roof rack.
It extends from 0.9m to 3.95 meters, yet it fits into the boot of a compact car!
Unlike other long ladders, the Xtend & Climb is portable. It is even convenient to travel with on airplanes.
The Xtend & Climb is NZ/AUS standards approved, weighs only 11.8kg's and is rated to 120kg's.
Optional rubber protective cover available.
|
|