David White 3175 Automatic Laser Level

Accuracy +/- 1.6mm per 30m

Who and what is the 3175 designed for ?

The David White 3175 laser level has the same functionality as the 3150 laser but in addition has manual
dial in dual grade up to 10% in 0.01% increments and a higher rotation capability .

It is a servo driven high accuracy visible automatic laser for both internal and external work.

The laser can self level in both horizontal and vertical modes.

Builders, commercial contractors and concrete placers can use the laser outside for the leveling
and squaring of profiles, boxing and concrete.

It's visible beam allows it to be used inside for suspended ceilings and internal fitouts.

Functionality such as scanning, alignment, and rotation speeds are controlled by a remote.

What functionality does the 3175 have ?

• Automatic Horizontal Leveling - with servo motors.
  
  
• Automatic Vertical Leveling - servo leveled when on it's side.
  
  
• Plumbing - Automatically plumbs laser dot to the ceiling.
  
  
• Squaring - when lying on it's side allows for 90 degree setout.
  
  
• String Line setout - when lying on it's side allows string line set out on windy days.
  
  
• Vertical plane - sends vertical plane out when lying on it's side for retaining walls etc.
  
  
• Scanning -Beam can be scanned in small arcs to give greater intensity
  
  
• Rotation control - 0 to 1000 rpm
  
  
• Grade - in manual mode dual dial in grade up 10% in each axis in 0.01% increments
  
  
• Remote control - controls laser functionality
  
  

What are the Specifications ?

3175 Laser Range : 425m radius / 850m diameter Accuracy : +/-1.6mm per 30m (10 sec arc) Grade accuracy : 0.1% Rotation speed variable : 0 - 1000rpm Dual dial in grade : upto 10% in 0.01% increments Power supply : four 'D'' cell alkaline batteries Battery Life : 60 hours approx with alkaline batteries Weather Protection : IP54 Water & Dustproof

LD18N receiver 3 accuracy modes +/- 0.75mm fine, +/-1.5mm std, +/-3mm coarse Speaker volume : off, low, med, high Reception angle : 90 degrees Power supply : 9v battery Displays : Front and rear Elevation display : 7 channel display

Calibration

Once shipped from the manufacturer, Accurate Instruments Optical and Electronic Service Centre calibrates all
instruments on collimators and ranges then fits them with the appropriate shockwatch, calibration sticker and
test calibration certificate. Shockwatches indicate to the user whether the instrument has been dropped.

What is the standard package and what are my options ?

A standard construction package usually consists of the laser, receiver, heavy duty aluminium tripod, carry case, remote control, shockwatch, alkaline batteries, calibration sticker and Test calibration certificate.

Optional staves and re-chargeable battery kits etc are also available.

Please phone to discuss a package to suit your requirements.