Accuracy +/- 1.6mm per 30m

Who and what is the 3150G GREEN beam designed for ?

The David White 3150G Green beam laser level is a servo driven visible automatic laser for internal work.

Until now very few green beam lasers have been available and are extremely expensive, the 3150 Green Beam
changes all that with high accuracy and affordability.

The Green Beam laser is up to 4 times brighter and is designed for ceiling fixers and internal fitout contractors
with it's auto leveling and high accuracy.

Functionality such as scanning, alignment, slope and rotation speeds are controlled by a remote.

What functionality does the 3150G have ?

• Automatic Horizontal Leveling - with servo motors.
  
  
• Automatic Vertical Leveling - servo leveled when on it's side.
  
  
• Plumbing - Automatically plumbs laser dot to the ceiling.
  
  
• Squaring - when lying on it's side allows for 90 degree setout.
  
  
• Vertical plane - sends vertical plane out when lying on it's side
  
  
• Scanning -Beam can be scanned in small arcs to give greater intensity
  
  
• Rotation Control - 0, 150, 300, 600 rpm
  
  
• Grade - the laser can be switched from auto to manual mode to allow grade overide in both axis.
  
  
• Remote control - controls functionality including grade adjustment for raked ceilings
  
  
• Manual mode - laser can be used in manual or automatic mode

• Anti drift system - indicates if the instrument has been moved
  
  

What are the Specifications ?

3150G Laser Accuracy : +/-1.6mm per 30m (10 sec arc) Rotational coverage : 360 degrees Rotation speed :0, 150, 300, 600rpm Power supply : four 'D' cell batteries Batteries : Ni-Mh rechargeable battery pack Battery Life : 60 hours approx with alkaline batteries

optional LD18N-G receiver 3 accuracy modes Fine: +/- 0.75mm, Std: +/- 1.5mm, Coarse: +/-3mm Power supply : 2x AA batteries Speaker volume : off, low, med, high Displays : front & rear LCD Reception angle : 90 degrees Auto shut : off after 6 min. Rotation capability : 50 - 1000 rpm Elevation displays : 7 channel display

Calibration

Once shipped from the manufacturer, Accurate Instruments Optical and Electronic Service Centre calibrates all
instruments on collimators and ranges then fits them with the appropriate shockwatch, calibration sticker and
test calibration certificate. Shockwatches indicate to the user whether the instrument has been dropped.

What is the standard package ?

The ceiling package consists of the laser, shockwatch, remote control, ceiling/vertical mount, 2 x magnetic targets
rechargeable battery pack, charger, calibration sticker and Test calibration certificate.

click here to Download 3100 Series PDF User Manual