Accurate Instruments (NZ) Ltd.
FREEPHONE : 0508 222 872

Email Enquiries

HOME



CST/berger ALHVG Green Beam Automatic Laser Level



WATERPROOF AND DUSTPROOF to IP67
CST/berger ALHVG Green Beam Laser Level

This instrument is
checked, calibrated
and certified by
Accurate Instruments
then fitted with a shockwatch.
CST/berger ALHVG Kit CST/berger ALHVG Rain

 

Accuracy +/- 1.6mm per 30m


Who and what is the ALHVG GREEN beam designed for ?

The CST/berger ALHVG has all the features of the ALHV model, yet has a highly visible Green beam designed for
internal work.
Featuring servo motors, the ALHVG can automatically self level in both horizontal and vertical modes.

The Green Beam laser is up to 4 times brighter and is designed for ceiling fixers and internal fitout contractors
with it's auto leveling and high accuracy.

Featuring servo motors, the ALHVG can automatically self level in both horizontal and vertical modes.
Functionality such as scanning, alignment, slope and rotation speeds are controlled by a remote.

An optional special Green Beam capable receiver is available for use with the laser over long distances inside, or outdoors for
building & general construction


What functionality does the ALHVG have ?

  • Automatic Horizontal Leveling - with servo motors.

  • Automatic Vertical Leveling - servo leveled when on it's side.

  • Plumbing - Automatically plumbs laser dot to the ceiling.

    •
  • Vertical Plumbing - Automatically plumbs laser dot to the floor when laser is used in vertical mode

  • Squaring - when lying on it's side allows for 90 degree setout.

  • Vertical plane - projects rotating vertical plane when on it's side.

    •
  • Scanning -Beam can be scanned in small arcs to give greater intensity

    •
  • Rotation Control - 0, 150, 300, 600 rpm

    •
  • Grade - the laser can be switched from auto to manual mode to allow grade overide in both axis.

  • Remote control - controls laser functionality including grade input

  • Manual mode - laser can be used in manual or automatic mode

  • Anti drift system - indicates if the instrument has been moved

    •
  • ON/OFF - using the remote the instrument can be turned off into sleep mode



What are the Specifications ?

ALHVG Laser
  • Accuracy : +/-1.6mm per 30m (10 sec arc)
  • Rotational coverage : 360 degrees
  • Rotation speed : 0, 150, 300, 600rpm
  • Power supply : four 'D' cell batteries
  • Batteries : Ni-Mh rechargeable battery pack
  • Battery Life : 60 hours approx with alkaline batteries

optional LD440-G receiver

  • 3 accuracy modes
    Fine: +/- 0.75mm, Std: +/- 1.5mm, Coarse: +/-3mm
  • Power supply : 2x AA batteries
  • Speaker volume : off, low, med, high
  • Displays : front & rear LCD
  • Reception angle : 90 degrees
  • Auto shut : off after 6 min.
  • Rotation capability : 50 - 1000 rpm
  • Elevation displays : 7 channel display

What is the warranty ?

The 3 year Warranty covers any defects in materials or workmanship.


Calibration

Once shipped from the manufacturer, Accurate Instruments Optical and Electronic Service Centre calibrates all
instruments on collimators and ranges then fits them with the appropriate shockwatch, calibration sticker and
test calibration certificate. Shockwatches indicate to the user whether the instrument has been dropped.


What is the standard package and what are my options ?

The ceiling package consists of ALHVG laser, shockwatch, remote control, ceiling/vertical mount, 2 x magnetic targets
rechargeable battery pack, charger, calibration sticker and Test calibration certificate

 

 

Accurate Instruments (NZ) Ltd. is a 100% New Zealand owned company.
Site Design copyright (c) 2002 LISBURN DESIGNS

Disclaimer