|
Accurate Instruments (NZ) Ltd.
192 Marua Road
Mt Wellington
Auckland
| |
Concrete
Remover
CRETE-WASH
Cretewash is an environmentally safe
concrete
remover-cleaner and wax
•
Sugar cane syrup based
• Zero harsh acids
• Dilute up to 8:1
• User friendly
• Bumper to Bumper safe
• Polished aluminium safe
• Treats and prevents rust
• Contains special waxes
• Biodegradable detergents
• Washes out in water
• Apply with sprayer, sponge, brush or pad |
 |
Crete Wash is a unique and safe formulation designed
to remove concrete from Concrete Mixing Trucks, Pump Trucks,
Equipment, Molds, Curb Machines, Tools, Tankers and any formwork. It is
a perfect product for the day to day washing down
of all your concrete gear. CreteWash can also be used bumper to bumper,
even on chrome, glass, rubber or polished aluminium, will not stain or
etch polished surfaces. Perfect for driveway mould and grease removal
without harsh stripping.
Crete-Wash turns dry concrete into a mud-like consistency. It should be
used for the every day care of those value items
that need care. |
 |
 |
This steel formwork had cretewash aprayed on and left to activate for a short time.
This helped to break down the concrete and the scraper run along to clean it off. |
 |
The wheel barrow was sprayed with cretewash then worked in until it became mushy then
washed out. |
 |
|
 |
| |
The cretewash is used to get the concrete splashes off aluminium windows after a concrete path is poured. Spray it on and leave for a
short time then with fingers or a rag help break it down then wash it off. |
 |
|
| |
CRETE-BLASTER
Creteblaster is an environmentally safe
concrete remover-cleaner and wax
• Non-Flammable
• Dilute up to 8:1
• No Solvents
• No VOC’s
• Treats and prevents rust
• Contains special waxes
• Phosphoric Acid – (Food Grade)
• Bio-degradable detergents
• Washes out in water
• Apply with sprayer, sponge, brush or pad |
 |
Crete Blaster
takes the elbow grease out of removing concrete that has been set for a
long time from your tools and
formwork. It will dissolve concrete into mud. CreteBlaster quickly
penetrates to remove set concrete, cement dust, grease,
grime and dirt, leaving behind a wax sealer to make it all the more
easier next time around. Removes existing rust, won’t create new rust. (Then for the day to day
just use Crete Wash) |
| |
 |
 |
| |
|
The laser receiver bracket had a build up of concrete gradually over a 2 year period. It was soaked in 4:1 creteblaster
over night then rubbed with fingers to break down the layers, then placed back in for an hour or so then worked on again
and again. There were two small patches where the concrete had gone so hard and ‘smoothed off’ that it need help
with a screw driver to budge them.
|
Crete-Wash and Crete-Blaster are designed to be used to clean up concrete in day-to-day use and naturally there are those of us trying to remove the old ‘hard’ concrete built up over time. This usually requires a number of applications and work to break down the layers as happened with the above bracket or with the old concrete mixers. (Think how difficult it is to clean the old baked on pans at home and how easily it is to clean the plates!) Reaction can vary from concrete to concrete depending on some of the additives that are put in these days.
|
Crete-Wash VERSUS Crete-Blaster
If you care about the
what’s under your
concrete use Crete Wash. It weakens and removes the render slurry
without damaging the surface
and can be sprayed
all over a concrete truck (including the polished aluminium
and chrome bull bars, bumpers
etc).
If you don’t care
about the finish under
your concrete use Crete Blaster. Use it to get all the big chunks off
because you’re a lazy
so & so and you
have neglected your gear because up until now there hasn’t
been
anything on the market that
makes cleaning it
easy. (You may have to apply the Blaster a number of times
depending on how thick the
build up is and how
many years since you last attempted to clean it) |
Accurate
Instruments (NZ) Ltd. is a 100% New Zealand owned company.
Site Design copyright (c) 2002 LISBURN DESIGNS
Disclaimer
|