Angle Measurer
| Bosch
Mitre Finder |
|
| |
|
Make the first cut the right cut!
The Bosch Mitre Finder is a great tool for...
|
 |
|
Calculating compound moulding cuts
Measuring exact trim cuts for remodelling
Checking / transferring angles for remodelling
Cabinet and counter installation
Measuring roofing angles
Fitting windows and doors
Aligning wood forms for concrete pouring
Fitting up carpeting, parquet and tile floors
Checking for correct fit-up to any angle surface
Truing saw blades
|
Specifications |
 |
- Length: 430mm
- Measuring Range: 0' to 220'
- Accuracy...
Electronic: ±0.1°
Readout: 0.1°
Vial: ±0.05°
- Power: 4 'AA' 1.5V Batteries
- Battery Life: 100 Hours
|
Features |
- Versatile measuring tool, the Bosch
Mitre Finder is 4 tools in one - Angle Finder, Compound Cut Calculator,
Protractor, Level.
- Angle Finder - Determines the exact angles of jobsite or workpiece, eliminating guesswork.
- Compound Cut Calculator - Automatically determines the exact
mitre and bevel settings necessary to make each crown moulding cut fit precisely.
- Protractor - precisely positions the workpiece or intended cut line at the desired angle.
- Level - Built-in vertical and horizontal spirit levels, accurate to 0 ±0.05°.
- Hold Function - To freeze measurements.
- Digital readout displays on front and back - For easier use.
- Leg Extension - For accurately measuring hard-to-reach angles.
- Rugged construction for durability.
- Calculates mitre and bevel angles automatically for compound crown
moulding cuts In 3 Easy Steps!
1) MEASURE SPRING ANGLE: Measure the spring angle of the moulding (usually 38°) by aligning the back of the moulding against the
Mitre Finder. Press the BV/MT button once. The LCD will display the exact spring angle.
2) MEASURE CORNER ANGLE: Measure the wall corner angle (usually 90°) by placing and extending the
Mitre Finder horizontally in the corner where the moulding will go. Press the BV/MT button again. The LCD will display the exact corner angle.
3) COMPUTE ANGLES: Press the BV/MT button a third time and the LCD will display the exact
mitre angle reading. Record this angle and press the BV/MT button a fourth time to display the exact bevel setting. Record this reading.
Now you are ready to quickly and accurately adjust your compound mitre saw with these two essential measurements for making the right cut the first time!
|
Accurate Instruments
(NZ) Ltd. is a 100% New Zealand owned company.
Site Design copyright (c) 2002 LISBURN DESIGNS
Disclaimer
|